Find settings by selecting your 3D printer
EasyCast HD Violet
50μm
Curing Time: 15s
Base Settings: 90
Base: 2 Rest: 10s
30μm
Curing Time: 12.5s
Base Settings: 90s
Base: 2
Rest: 10s
EasyCast HD Brown – B9Creator
- Select Emerald Profile – Select Emerald Profile and change base curing to 1.34s
EasyCast HD Brown – B9Core
- Select Emerald Profile
EasyCast HD 02 – B9 Core
- Contact Info@resinworks3D.com for custom profile
EasyCast HD Brown & EasyCast HD 02
- Use WIC 100 or PIC 100 Profile
EasyCast HD SLA Amber
Use open mode and select Castable V2 Profile
EasyCast HD Brown
30μm
Curing Time: 4.5
Base Curing: 50
Base: 1
Buffer: 2
50μm
Curing Time: 6.5
Base Curing: 50
Base: 1
Buffer: 2
EasyCast HD 02
30μm
Curing Time: 3
Base Curing: 40
Base: 1
Buffer: 2
50μm
Curing Time: 4.5
Base Curing: 40
Base: 1
Buffer: 2
Dental Cast HD
30μm
Curing Time: 3
Base Curing: 40
Base: 1
Buffer: 2
50μm
Curing Time: 4.5
Base Curing: 40
Base: 1
Buffer: 2
Dental Model HD
30μm
Curing Time: 1.5
Base Curing: 40
Base: 1
Buffer: 2
50μm
Curing Time: 1.7
Base Curing: 40
Base: 1
Buffer: 2
EasyCast HD Violet
Phrozen 3D Shuffle (Profile)
Phrozen 3D Shuffle ParaLED 2.0 (Profile)
Phrozen Shuffle 4K (Profile)
EasyCast HD Brown
- Contact Emil at info@junction3d.com
EasyCast HD Brown
- Select Grey Profile
Select your material from the tab below
MiiCraft
30μm
- Curing Time: 4.5
- Base Curing: 50
- Base: 1
- Buffer: 2
MiiCraft
50μm
- Curing Time: 6.5
- Base Curing: 50
- Base: 1
- Buffer: 2
Asiga
Solus
- Select Resinworks3D Profile
Envisiontec
- Select Default Settings
MoonRay
- Select Grey Profile
B9Creator v1.2
30μm
- Select Emerald Profile and change base curing to 1.34s
B9Core
- Select Emerald Profile
Anycubic Photon
50μm
- Curing Time: 15s
- Base Settings: 90
- Base: 1
- Rest: 10s
30μm
- Curing Time: 12.5s
- Base Settings: 90s
- Base: 1
- Rest: 10s
Bean 3D printer by Kudo
- Curing Time: 10-13 (12.5 Seconds should work) at 50um
- Lift Sequence: Slow
Wanhao D7
50μm
- Curing Time: 15s
- Base Settings: 150
- Base: 2
- Rest: 1.5s
30μm
- Curing Time: 12.5s
- Base Settings: 150s
- Base: 2
- Rest: 1.5s
These are suggested curing times based on our internal printers. You may need to adjust +/- 1 to 2 seconds to curing time as LCD drivers have varying intensities.
Phrozen 3D Shuffle (Profile)
Phrozen 3D Shuffle ParaLED 2.0 (Profile)
Phrozen Shuffle 4K (Profile)
How to Import Into PZSlice (Image and Profiles)
Settings for Web (Manual Input)
Anycubic Photon
50μm
- Curing Time: 15s
- Base Settings: 90
- Base: 2
- Rest: 10s
30μm
- Curing Time: 12.5s
- Base Settings: 90s
- Base: 2
- Rest: 10s
Anycubic Photon S
50μm
- Curing Time: 11s
- Base Settings: 90
- Base: 3
- Rest: 10s
30μm
- Curing Time: 12.5s
- Base Settings: 90s
- Base: 3
- Rest: 10s
Wanhao D7
50μm
- Curing Time: 15s
- Base Settings: 150
- Base: 2
- Rest: 1.5s
30μm
- Curing Time: 12.5s
- Base Settings: 150s
- Base: 2
- Rest: 1.5s
MiiCraft
30μm
- Curing Time: 3
- Base Curing: 40
- Base: 1
- Buffer: 2
MiiCraft
50μm
- Curing Time: 4.5
- Base Curing: 40
- Base: 1
- Buffer: 2
MiiCraft
30μm
- Curing Time: 3
- Base Curing: 40
- Base: 1
- Buffer: 2
MiiCraft
50μm
- Curing Time: 4.5
- Base Curing: 40
- Base: 1
- Buffer: 2
MiiCraft
30μm
- Curing Time: 1.5
- Base Curing: 40
- Base: 1
- Buffer: 2
MiiCraft
50μm
- Curing Time: 1.7
- Base Curing: 40
- Base: 1
- Buffer: 2